Our 2-component Clear Bases are currently available in 3 sheens (Matte, Satin and Gloss) and when cross-linked with our Activator they exhibit outstanding protection for previously painted surfaces in the harshest of environments. Mixing ratio is: 3 parts Clear to 1 part Activator. Total control of the application, open-time, and cure rate can be achieved by using our Accelerator, Brush & Roll Additive and Reducer.
Use with: Colorants, Activator, Accelerator, Brush & Roll Additive and Reducer
- 96 oz Short-Fill Gallon
A unique water base, acrylic primer designed to block Patina Aging Solutions & Rust Activator from reaching the metal or wood surface chosen as a substrate. Other primers cannot be used because they allow the Patina Aging Solutions & Activators to penetrate through to the substrate.This will disrupt the desired patina color and damage the finish by bringing rust or tannic acids to the surface.
Use with: Metal Effects Oxidizing Paints
- 4 oz.
Formulated with the same shimmering particles and ease of application as our original "Satin Sheen" Metallic Paints but with a Matte finish. Besides the Matte finish, the do exhibit some unique qualities versus their counterparts, like holding the pattern created by stiff brushes or paint pads. Watch our video, Modern Masters Minute on Tone-on-Tone Metallic Paint finishes for more ideas.
Use with: Metallic Paint Primer
A pre-colored, trowel applied, architectural coating that emits a symphonic blend of shimmer, luster, elegance and environmental friendliness. Metallic Plaster is mixed and color matched in our factory for consistent project results and available in 25 standard colors. It is durable, water resistant, mold & mildew resistant and will adhere to any primed surface. This lightweight water base coating applies easily and can be used to create a wide variety of decorative finishes.
ShimmerStone® is durable, water resistant, mold & mildew resistant and will adhere to any primed surface. The lightweight coating applies easily and can be used to create a wide variety of shimmering decorative finishes. It does not lift when used with Modellos™, stencils with adhesive sprays or painter’s tape, making it perfect for multilayer finishes. The Tint Base can be used untinted or custom tinted using small amounts of Platinum Series colorants or other water base colorants.
- Gloss Measured 10-20 @ 60°
- For use on exterior surfaces such as: doors, porch surrounds and supports, decorative moulding, garage doors and outdoor furniture
- For use on interior surfaces such as: bare or stained wood, cabinetry, mantels, wainscot, paneling, crown moulding, baseboards, chair rails and furniture
JWR Artist's Acrylics contain 100% acrylic binders for flexibility and durability, with concentrated, lightfast rated pigments for color longevity. Their creamy, easy to brush consistency allows for easy dilution in water for water color techniques and airbrushing. They dry to a flexible, water resistant, non-yellowing film with a consistent matte finish. Conforms to ASTM D4236.
Manufactured with our exclusive vacuum process which eliminates air bubbles and promotes a smooth and extended application. This heavy-bodied, transparent, gloss or matte Art Gel Medium is used to extend our acrylic colors for producing textures, glazes, etc. on canvas, paper and other flexible surfaces. It dries clear and is non-yellowing, so it is perfect for color print enhancing and texturing flat canvas art.
Texture Paste Light SHV (Super High Viscosity) is a lightweight, flexible, non-mud cracking alternative to Modeling Paste, when flexibility and weight are a factor. Its unique properties make it perfect for texturing everything from paintable wall-coverings to fine art. Texture Paste Light can be mixed with any of our acrylic paints and mediums, and it weighs in at an incredibly low 4 lbs/gallon.
- 2-Gallon Pail